This is my first alarm system and my first post to this forum. I have a lot to learn but hopefully I can start here.
1. I performed the enrollment mode for 3 door/window contacts, smoke detector, and 2 motion sensors. All work but the motion detector want pick up movement. Did the walk test and the placement test. All great but then it want pick up motion. I think I changed the zone type by accident. How do I go to these two zones and change the zone type or what else could cause this motion detector to not pick up. It is the Dual Pet Immun.
2. I have hooked up the hardwired siren to the I/O 1 but having difficulty with code 009, 013. When at 013 it comes up with Toggle on 12 - - - 7. What gives with this. I thought I needed 01 for 013. Any help would be great.
3. Where can I find the DSC DLS software to download. Hopefully it will be a lot easier to program.
Thanks for any help.