Products on www.Shieldlab.com


Alarm Monitoring

Alarm Monitoring

PPC Ad

Trustpilot Badge >

Women's Self Defense

Women's Self Defense

Members Online

133 Guests, 0 Users

Author Topic: DSC 832 and Linear PD-2 dialer hookup problems  (Read 24047 times)

paf

  • Member
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
DSC 832 and Linear PD-2 dialer hookup problems
« on: January 01, 2007, 01:41:36 PM »
DSC Power832 PC5010 ver2 and Linear PD-2 dialer hookup problems

I have been attempting to hookup a PD-2 dialer with the DSC832 and it does not work. My telephone system is a two-wire system (the other two wires within the telephone main box are not hooked up).  The telephone system works good and I tested the jack supply the DSC panel and all is good.

I have the red telephone wire coming out of the PD-2 (console jack) terminating at the DSC “ring” terminal and the green telephone wire coming out of the PD-2 (console jack) terminating on the DSC “TIP” terminal.

Does not work – please help.

Thanks,
 :-[

alanwaldo

  • Security Pro
  • ***
  • Posts: 80
  • Karma: +0/-0
  • Looking Up!
    • View Profile
    • My Home Page
Re: DSC 832 and Linear PD-2 dialer hookup problems
« Reply #1 on: June 07, 2007, 10:26:14 PM »
I know this topic is old but it is a valid question...

The connections from the PD-2 Consol plug should go to a device like this:
http://www.homesecuritystore.com/ezstore123/DTProductZoom.asp?productID=1042

And the connections from the PD-2 Phone jack should go to the telephone line.  Which "could" be the Ring and Tip in the DSC if you have no need of line capture.
Best Regards,
Alan, W4WMM

 

Powered by EzPortal