Products on www.Shieldlab.com


Alarm Monitoring

Alarm Monitoring

PPC Ad

Trustpilot Badge >

Women's Self Defense

Women's Self Defense

Members Online

152 Guests, 0 Users

Author Topic: Four wire smokes not resetting on 4229 expander board  (Read 1148 times)

inline6

  • Member
  • *
  • Posts: 7
  • Karma: +0/-0
    • View Profile
Four wire smokes not resetting on 4229 expander board
« on: February 17, 2015, 09:58:17 PM »
Currently installing a Vista 20P system in my house. The upstairs is wired and programmed correctly to verify/reset the Upstairs four wire smoke detectors using the on-board output 17 activating a relay. Works like a charm.
Downstairs is a 4229 expansion board in which I have wired the similar setup ( relays/ smokes/ EOL relays etc.)
The upstairs is using Double-Zoning so the Address is 08 on the exp. board, I have a PIR in zone 17 working correctly on the Walk test.
During the (Zone 18) smoke testing (ESL TS7's ) the unit latches, no fire alarm/fault at the panel indicated, and the programmed relay doesn't change state.(so there is no "reset")
I can alter the relay state at the panel keyboard but it won't auto fire verify/reset.
The *56 programming is identical to Upstairs save the relay number ( which is 1 for downstairs )
Any insights and suggestions are greatly appreciated


 

Powered by EzPortal