Products on

Alarm Monitoring

Alarm Monitoring


Trustpilot Badge >

Women's Self Defense

Women's Self Defense

Members Online

119 Guests, 0 Users

Author Topic: New Firmware is out, and you can now use it to unlock and default a 2GIG panel  (Read 2982 times)


  • Member
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
1.14 was recently released, but it was buggy and 1.14.01 is now out to replace it.

One of the intentional aspects (bug?) of  firmware 1.14 and 1.14.01, is that it can be used to unlock and default any locked out 2GIG GoControl panel.

To unlock a panel with firmware, you will need to get the $20 firmware update cable, which is available pretty much everywhere (Google '2GIG-UPCBL2')

Download firmware 1.14/1.14.01, and 1.13 HERE

Flash 1.14 or 1.14.01, then immediately flash 1.13. This will act as a hard panel reset, and default all programming Q's including Q43, Q44, and Q45 to default 2GIG OEM (this will also default all User passwords, and all sensor zones).

Default Installer 1561
Default Master User 1111

For how to flash the firmware, see Video and Instructions


Powered by EzPortal