Products on www.Shieldlab.com


Alarm Monitoring

Alarm Monitoring

PPC Ad

Trustpilot Badge >

Women's Self Defense

Women's Self Defense

Members Online

144 Guests, 1 User
VR46

Author Topic: Crossing Zone Programming  (Read 184 times)

User16520

  • Gold Member
  • **
  • Posts: 21
  • Karma: +0/-0
    • View Profile
Crossing Zone Programming
« on: May 19, 2017, 06:01:35 PM »
How does crossing zone work? Can you give a good example and how to program it?

I am new to alarm system.

Thanks all.

AlarmMike

  • Administrator
  • Security Guru
  • *****
  • Posts: 1286
  • Karma: +1/-0
    • View Profile
Re: Crossing Zone Programming
« Reply #1 on: May 19, 2017, 08:40:54 PM »
Straight from the manual...

"...When an alarm is detected on a zone (with the Cross Zone attribute enabled), a timer is started. The alarm is not transmitted and
the bell output is not activated unless a second cross zone enabled zone is violated before the Cross Zone timer times out..."

To enable...

(018) option 6 ON
(101-164) option 9 ON for 2 or more zones to function as Cross Zone verification
(176) Cross Zone timer (1-255 seconds)
To the world you may be one person, but to one person you are the world.
- Kidney transplant recipient 04/27/2011

User16520

  • Gold Member
  • **
  • Posts: 21
  • Karma: +0/-0
    • View Profile
Re: Crossing Zone Programming
« Reply #2 on: May 22, 2017, 12:21:10 AM »
Thanks Mike for the info.

 

Powered by EzPortal