Products on www.Shieldlab.com


Alarm Monitoring

Alarm Monitoring

PPC Ad

Trustpilot Badge >

Women's Self Defense

Women's Self Defense

Members Online

135 Guests, 1 User
EdLank

Author Topic: adding another keypad and wiring some motion detection  (Read 1142 times)

apetrov1x5

  • Gold Member
  • **
  • Posts: 28
  • Karma: +0/-0
    • View Profile
Re: adding another keypad and wiring some motion detection
« Reply #30 on: November 28, 2018, 04:04:23 PM »
what are the 6 digit serial #s for your current zones 3&4 that are being moved to zones 11&12? we can walk you through exactly what to enter..also do motions 3&4 have the same zone definitions as the current zones 11&12?

Sorry for a delayed reply - finally took the pictures of the sensors, so I think the SN are:

328B91 sensor 3
37B092 sensor 4

right?

P.S. somehow the picture upload doesn't work...will keep trying

apetrov1x5

  • Gold Member
  • **
  • Posts: 28
  • Karma: +0/-0
    • View Profile
Re: adding another keypad and wiring some motion detection
« Reply #31 on: November 30, 2018, 12:57:50 AM »
If you pull zone 3&4 motions off the bracket there will be a 6 digit serial # on the back with possibly some letters, beginning with 3

The serial number was under ESN number correct?

fremont611

  • Security Guru
  • ****
  • Posts: 438
  • Karma: +7/-0
  • You smell somethin'?
    • View Profile
Re: adding another keypad and wiring some motion detection
« Reply #32 on: November 30, 2018, 02:39:37 AM »
yes, those look correct, what zone definition do you want on zones 11/12?( interior or stay/away)?, and i am assuming the new hardwire motions on 3&4 will have the same zone definitions as the wireless motions had that they are replacing?


fremont611

  • Security Guru
  • ****
  • Posts: 438
  • Karma: +7/-0
  • You smell somethin'?
    • View Profile
Re: adding another keypad and wiring some motion detection
« Reply #33 on: November 30, 2018, 03:50:05 AM »
assuming you want zones 11/12 as “interior”(04) enter the following EXACTLY...if you mess up at any point hit ### and tell us, the > is the > on your keypad

*8 (installer code) 804 03 000 000 04 000 000 11 328*2*91 12 37*2*092 # 203 3 4 # 001 >>  >>  >>  >>  >>  >>  >>  >>  >>  >> 04 04  # 103  8 # 104 8 # 111 8 # 112 8###

make sure you enter this exactly, do not mess up, i cannot stress enough, if you mess up or think you messed up, do not move forward, hit ## and  log where you were at and post it here

fremont611

  • Security Guru
  • ****
  • Posts: 438
  • Karma: +7/-0
  • You smell somethin'?
    • View Profile
Re: adding another keypad and wiring some motion det
« Reply #34 on: November 30, 2018, 04:25:50 AM »
wait until u get verification from alarmmike, he might see something i'm amiss to
« Last Edit: November 30, 2018, 04:31:30 AM by fremont611 »

apetrov1x5

  • Gold Member
  • **
  • Posts: 28
  • Karma: +0/-0
    • View Profile
Re: adding another keypad and wiring some motion detection
« Reply #35 on: November 30, 2018, 08:45:15 AM »
yes, those look correct, what zone definition do you want on zones 11/12?( interior or stay/away)?, and i am assuming the new hardwire motions on 3&4 will have the same zone definitions as the wireless motions had that they are replacing?

yes, zones 3 and 4 are the same zone definition as 11 and 12 (I don't have the stay in mode set up on my alarm, I can only arm it when I leave and disarm when I enter the house).

Thank you so much for going through the trouble of actually putting this long string of codes together! No way I could have done it by myself, not this year for sure!

apetrov1x5

  • Gold Member
  • **
  • Posts: 28
  • Karma: +0/-0
    • View Profile
Re: adding another keypad and wiring some motion detection
« Reply #36 on: November 30, 2018, 08:46:53 AM »
.......

Could you (or anyone who knows this stuff) please-please look though the last messages from @fremont611?

AlarmMike

  • Administrator
  • Security Guru
  • *****
  • Posts: 1481
  • Karma: +5/-0
    • View Profile
Re: adding another keypad and wiring some motion detection
« Reply #37 on: December 01, 2018, 01:59:07 AM »
*8 (installer code) 804 03 000 000 04 000 000 11 328*2*91 12 37*2*092 # 203 3 4 # 001 >>  >>  05  05  >>  >>  >>  >>  >>  >> 05 05  # 103  8 # 104 8 # 111 8 # 112 8###


I've been half-following this thread.  Been busy keeping the spammers at bay and also installing an upgraded camera system at my kids' school.

Looks good to me.  Only thing I would do different is make the motions Stay/Away vs Interior.  I prefer 05 vs 04 to reduce the chance of false alarms unless I'm absolutely certain the area covered will not be entered by the homeowner while armed.  (For the OP, the only difference is that with 05, it will automatically bypass the motions if you stay home without having to manually bypass them.)  The bold notated above would make this change if so desired.  But otherwise it looks good.

The full string of programming should really only be done by a pro.  To avoid a potential mis-key, I'd suggest breaking it up by section for a novice.  "Pain" to re-enter programming for each section, but easier to follow and understand the programming as a whole.

*8 xxxx 804 03 000 000 04 000 000 ## --- Erases ESN's from zones 3 and 4
*8 xxxx 804 11 328*2*91 12 37*2*092 ## --- Enters ESN's in zones 11 and 12
*8 xxxx 203 3 4 ## --- Turns zones 11 and 12 ON for partition 1
*8 xxxx  001 >>  >>  05  05  >>  >>  >>  >>  >>  >>  05  05  ## --- Programs zones 3, 4, 11, and 12 as Stay/Away motions.  (04 if you want straight Interior)
*8 xxxx 103  8 # 104 8 # 111 8 # 112 8 ### --- This string should turn OFF bit 8 for 3 and 4 thus making them hardwired zones and 11 and 12 bit 8 ON for wireless.

Zone types 04 vs 05 comes down to personal preference.
1993-1995   Worked for one of the "nationals"  /  1996-Present   Independent dealer
Systems supported:   DSC, Ademco/Honeywell, ITI/GE/Interlogix
-----------------------------
To the world you may be one person, but to one person you are the world.
- Kidney transplant recipient 04/27/2011

apetrov1x5

  • Gold Member
  • **
  • Posts: 28
  • Karma: +0/-0
    • View Profile
Re: adding another keypad and wiring some motion detection
« Reply #38 on: December 01, 2018, 02:54:20 AM »
*8 (installer code) 804 03 000 000 04 000 000 11 328*2*91 12 37*2*092 # 203 3 4 # 001 >>  >>  05  05  >>  >>  >>  >>  >>  >> 05 05  # 103  8 # 104 8 # 111 8 # 112 8###


I've been half-following this thread.  Been busy keeping the spammers at bay and also installing an upgraded camera system at my kids' school.

Looks good to me.  Only thing I would do different is make the motions Stay/Away vs Interior.  I prefer 05 vs 04 to reduce the chance of false alarms unless I'm absolutely certain the area covered will not be entered by the homeowner while armed.  (For the OP, the only difference is that with 05, it will automatically bypass the motions if you stay home without having to manually bypass them.)  The bold notated above would make this change if so desired.  But otherwise it looks good.

The full string of programming should really only be done by a pro.  To avoid a potential mis-key, I'd suggest breaking it up by section for a novice.  "Pain" to re-enter programming for each section, but easier to follow and understand the programming as a whole.

*8 xxxx 804 03 000 000 04 000 000 ## --- Erases ESN's from zones 3 and 4
*8 xxxx 804 11 328*2*91 12 37*2*092 ## --- Enters ESN's in zones 11 and 12
*8 xxxx 203 3 4 ## --- Turns zones 11 and 12 ON for partition 1
*8 xxxx  001 >>  >>  05  05  >>  >>  >>  >>  >>  >>  05  05  ## --- Programs zones 3, 4, 11, and 12 as Stay/Away motions.  (04 if you want straight Interior)
*8 xxxx 103  8 # 104 8 # 111 8 # 112 8 ### --- This string should turn OFF bit 8 for 3 and 4 thus making them hardwired zones and 11 and 12 bit 8 ON for wireless.

Zone types 04 vs 05 comes down to personal preference.

another BIG thank you to you! And to everybody who kept answering my noobest questions, but I really enjoy doing things by myself (even the ones I am not supposed to) :D

As to the difference on stay/away vs interior - when I read the info on this, as I understood it, the setup in which one can arm the system while being at home needs perimeter sensors on doors, windows, right? I only have one front door open/close sensor, all other sensors are interior sensors, therefore I will be triggering them as I move through the house, causing false alarms. Please do correct me if I am getting this all wrong.

apetrov1x5

  • Gold Member
  • **
  • Posts: 28
  • Karma: +0/-0
    • View Profile
Re: adding another keypad and wiring some motion detection
« Reply #39 on: December 01, 2018, 01:12:05 PM »
ehhh, speaking about noob questions:

the sensors (wired ones) have to be wired when I attempt programing? or should I key in everything first and only after that connect the wired sensors?
« Last Edit: December 03, 2018, 02:15:08 AM by apetrov1x5 »

 

Powered by EzPortal