Products on www.Shieldlab.com


Alarm Monitoring

Alarm Monitoring

PPC Ad

Trustpilot Badge >

Women's Self Defense

Women's Self Defense

Members Online

91 Guests, 0 Users

Author Topic: Is it possible to automatically show open zones on keypad?  (Read 248 times)

VR46

  • Security Master
  • ***
  • Posts: 100
  • Karma: +1/-0
    • View Profile
Is it possible to automatically show open zones on keypad?
« on: January 11, 2019, 02:36:13 PM »
PC1832
PK5500 Keypad

I have 2 zones programmed as 26: 24 hr non-alarm.

Right now the only way for me to know if these zones are open is to use the keypad buttons and go through the menu. Is it possible to have these automatically show up on the display when they are open so I will know at a glance when I set my alarm every night?

Thanks.


 
« Last Edit: January 14, 2019, 12:42:51 PM by VR46 »

fremont611

  • Security Guru
  • ****
  • Posts: 450
  • Karma: +7/-0
  • You smell somethin'?
    • View Profile
Re: Is it possible to automatically shop open zones on keypad?
« Reply #1 on: January 12, 2019, 05:31:35 PM »
*8 master code * 076 8 ## I think

VR46

  • Security Master
  • ***
  • Posts: 100
  • Karma: +1/-0
    • View Profile
Re: Is it possible to automatically show open zones on keypad?
« Reply #2 on: January 14, 2019, 05:05:53 PM »
I tried to find reference to "076" in the manual but couldn't. Do you know what that functoin is called?

Thanks.

DSC User

  • Member
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Re: Is it possible to automatically show open zones on keypad?
« Reply #3 on: January 14, 2019, 08:19:35 PM »
from the reference manual:
Automatic Scrolling of Open Zones - The LCD keypad automatically scrolls through open zones while the keypad is idle.  This feature, if enabled, will override the clock display.  This option can be programmed in LCD programming section [076], Option [8].

AlarmMike

  • Administrator
  • Security Guru
  • *****
  • Posts: 1519
  • Karma: +5/-0
    • View Profile
Re: Is it possible to automatically show open zones on keypad?
« Reply #4 on: January 15, 2019, 12:04:47 AM »
This is covered in the PK5500 programming manual, not the PC1832 manual.
1993-1995   Worked for one of the "nationals"  /  1996-Present   Independent dealer
Systems supported:   DSC, Ademco/Honeywell, ITI/GE/Interlogix
-----------------------------
To the world you may be one person, but to one person you are the world.
- Kidney transplant recipient 04/27/2011

VR46

  • Security Master
  • ***
  • Posts: 100
  • Karma: +1/-0
    • View Profile
Re: Is it possible to automatically show open zones on keypad?
« Reply #5 on: January 15, 2019, 05:09:34 PM »
Ah that's it - I was looking at the wrong manual!

It looks like it cannot be zone specific, but that's OK it's still a great improvement.

Thank you to everyone!


 

Powered by EzPortal