Products on www.Shieldlab.com


Alarm Monitoring

Alarm Monitoring

PPC Ad

Trustpilot Badge >

Women's Self Defense

Women's Self Defense

Members Online

38 Guests, 1 User
aznative

Author Topic: PC5010 V2 refuses to load new program from DLS2002 V2  (Read 91 times)

wrenchwerk

  • Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
PC5010 V2 refuses to load new program from DLS2002 V2
« on: March 12, 2019, 08:24:03 PM »
I have a working 5010 with added modules. I wanted to add a zone and installed a 5108 V2. From the 5500Z keypad I have the supervision set OK. When I check for supervised modules all show and the new 5108 shows as zones 9-12, 13-16. I have labeled the new zone 9 in the keypad. Problem is the new zone partition, attributes and definitions will not download from my laptop through a cable (NOT a pclink) to the 5010. This cable has worked every time in the past, it's not that. I have read and followed and checked everything I can think of from the installation and program manuals.
I do not see zone 9 (the new one) showing in the bypass selections.
What am I missing?   Thanks , Bill

AlarmMike

  • Administrator
  • Security Guru
  • *****
  • Posts: 1518
  • Karma: +5/-0
    • View Profile
Re: PC5010 V2 refuses to load new program from DLS2002 V2
« Reply #1 on: March 12, 2019, 09:59:05 PM »
203 partition bit 1 turned on?
1993-1995   Worked for one of the "nationals"  /  1996-Present   Independent dealer
Systems supported:   DSC, Ademco/Honeywell, ITI/GE/Interlogix
-----------------------------
To the world you may be one person, but to one person you are the world.
- Kidney transplant recipient 04/27/2011

wrenchwerk

  • Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: PC5010 V2 refuses to load new program from DLS2002 V2
« Reply #2 on: March 13, 2019, 07:36:10 PM »
Hey AlarmMike,
Thanks for the tip! You are the guru!
I did have that 203 partition set correctly but in the non-loadable DLS. I still can't figure what is going on with the 2002 software. Same laptop same everything just no go.
I did get it setup from the keypad. I just struggled with the "toggle" settings as I have never used them. Got that down now.
Thanks Again, Bill

AlarmMike

  • Administrator
  • Security Guru
  • *****
  • Posts: 1518
  • Karma: +5/-0
    • View Profile
Re: PC5010 V2 refuses to load new program from DLS2002 V2
« Reply #3 on: March 14, 2019, 05:41:25 PM »
What do you mean "not a PC link"?

Chances are your issues is 5108 v2.0 does not list 5010 as a compatible panel.  You either need to find a v1.0 expander, or upgrade to an 1832.
« Last Edit: March 14, 2019, 05:49:22 PM by AlarmMike »
1993-1995   Worked for one of the "nationals"  /  1996-Present   Independent dealer
Systems supported:   DSC, Ademco/Honeywell, ITI/GE/Interlogix
-----------------------------
To the world you may be one person, but to one person you are the world.
- Kidney transplant recipient 04/27/2011

 

Powered by EzPortal