Products on www.Shieldlab.com


Alarm Monitoring

Alarm Monitoring

PPC Ad

Trustpilot Badge >

Women's Self Defense

Women's Self Defense

Members Online

27 Guests, 2 Users
murphy62,
AlarmMike

Author Topic: DSC 1832 Service Required Trouble  (Read 3146 times)

gesoneguy

  • Guest
DSC 1832 Service Required Trouble
« on: April 24, 2008, 03:32:32 PM »
I'm installing a DSC 1832.  I disabled TLM and set the clock, but still get a message:

SERVICE REQUIRED
GENERAL SYS TMPR

What am I missing?  Thanks!

Miko

  • Security Pro
  • ***
  • Posts: 72
  • Karma: +0/-0
    • View Profile
    • Adi-Olympo
Re: DSC 1832 Service Required Trouble
« Reply #1 on: April 24, 2008, 03:37:31 PM »
I'm installing a DSC 1832.
SERVICE REQUIRED
GENERAL SYS TMPR

TMPR = tamper.
Check every system module for "tmp" contact - expecially additional system power supplies and zone expanders. Tmp should be connected to blk or com (simple on ground) with no resistor.

gesoneguy

  • Guest
Re: DSC 1832 Service Required Trouble
« Reply #2 on: April 24, 2008, 04:11:14 PM »
Thanks so much!  Forgot to bridge a tamper contact on expansion board.

george6488

  • Security Guru
  • ****
  • Posts: 897
  • Karma: +0/-0
  • It's easier to ask for forgiveness than permission
    • View Profile
Re: DSC 1832 Service Required Trouble
« Reply #3 on: April 24, 2008, 04:57:35 PM »
The bridge on the expansion module should be solid wire....not a resistor.

Miko

  • Security Pro
  • ***
  • Posts: 72
  • Karma: +0/-0
    • View Profile
    • Adi-Olympo
Re: DSC 1832 Service Required Trouble
« Reply #4 on: April 24, 2008, 05:06:56 PM »

 

Powered by EzPortal