SMF - Just Installed!
Welcome to the forums wmv. Please don't cross post and hijack existing threads - create your own in the relevant forum. With that said, let's try address your issue now that your here.First off, you need to let us know what Brinks panel you have (look inside the door of the metal panel box). Secondly, if the keypad is beeping, you need to let us know any corresponding codes you see.I assume that you don't have a monitoring agreement with Brinks? If you do, you would be better off calling them for support. If not, then likely the beeping is due to a communication error or low battery.FWIW, those panels cannot be configured by end users. I replaced a Brinks BHS-2000 with a Ademco Vista 20P for that reason. I still have an old keypad lying around so you can PM if you want it.