Products on www.Shieldlab.com


Alarm Monitoring

Alarm Monitoring

PPC Ad

Trustpilot Badge >

Women's Self Defense

Women's Self Defense

Members Online

122 Guests, 2 Users
Flyct,
securitydude123

Author Topic: where is the Z800 fuse overload protector  (Read 3295 times)

bjk

  • Member
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
where is the Z800 fuse overload protector
« on: August 18, 2014, 11:55:05 PM »
My Z800 RE security system worked well until three days ago.  I began to beep, and the trouble light and zone 2 light turned on.  I consulted my manual and found out the the cause could be a low battery or casued by a 2.5 amp fuse overload protector.  I replaced the old battery with a new one this morning, but the trouble and zone 2 lights are still on.  I need to check the 2.5 amp fuse but I do  not know how to find it.  Could anyone help me?

bramfrank

  • Security Guru
  • ****
  • Posts: 659
  • Karma: +10/-1
    • View Profile
Re: where is the Z800 fuse overload protector
« Reply #1 on: August 19, 2014, 01:31:16 PM »
Cycle power to the panel (disconnect the battery and the AC, then reapply) and all will be well.
Able1 is a twit.  Correction, Twit is too mild a term.

Magnum Alert

  • Pro-Tech Advisor/Moderator
  • Security Guru
  • *****
  • Posts: 3273
  • Karma: +177/-0
  • NICET Certified - Fire Alarm Systems - #121764
    • View Profile
Re: where is the Z800 fuse overload protector
« Reply #2 on: August 20, 2014, 12:48:52 AM »
Yes, on those Moose panels, you have to manually start a battery test by holding down the 7 key.  Otherwise, it will never test the new battery to see that it's good.

Recycling power will clear it, too.  those panels are bulletproof.
Specializing in Ademco, DSC, DMP, Moose, Napco, and GE Concord and NetworX.
NICET certified - #121764
VESDA certified designer/installer.

 

Powered by EzPortal